Cans packaging EPR Sweden: what an aluminium can costs per 1,000 packs, 2027

What this page estimates for an aluminium can in Sweden

The aluminium can on this page is a drinks can made of aluminium. It has one component, each matched to the published rates of the 2027 schedule of Näringslivets Producentansvar i Sverige AB (NPA) förpackningsavgifter for Sweden; weight times rate gives a fee per 1,000 packs in SEK. The figures are estimates built on starting weights.

What is in an aluminium can

The can is one aluminium component. The ring pull and the printed coating are part of that single weighed unit.

Starting weights, an Instica estimate for a typical pack and not a measured weight: can (aluminium, 14 g).

Can

aluminium, 14 g (Instica starting estimate)

Worked example: 1,000 aluminium cans in Sweden

One aluminium can of the Standard (12 oz) size weighs 14 g in total. For each component the table gives its weight, the matched published rates, and the fee for 1,000 packs.

Added together, the estimate for 1,000 packs is SEK 193.06.

Divide by 1,000 for a single pack: about SEK 0.1931.

What the fee tool returns for 1,000 aluminium cans in Sweden

Entered into the public fee tool for Sweden (2027 schedule, effective January 1, 2027), 1,000 aluminium cans give the figures below. The tool is the same engine that prices a report, so this page and the tool agree.

The tool total is SEK 193.06.

Which published rates were matched in Sweden

One published rate was matched to the pack in Sweden from the 2027 schedule. Each is quoted from the programme’s own fee table; the page does not change the rate or round it.

Can, 14 g: one matched rate

How size changes the fee for an aluminium can

The weight of an aluminium can depends on its size. The table prices each of the 2 sizes with the same matched rates, so the only thing that changes between rows is the weight.

Each component of the aluminium can priced at every size, at the matched rates for Sweden.

What if the aluminium can used another material?

Suppose the main component of the aluminium can, weighing 14 g, were made of another material. The table prices the same weight in each material class that Sweden publishes a rate for, at the lowest published rate in that class.

A fee comparison only: another material changes weight and protection too.

What a larger run of aluminium cans costs in Sweden

Fees scale with the number of packs, because the schedule charges by mass. The table repeats the worked example for larger runs of the Standard (12 oz) aluminium can in Sweden. Nothing else changes between rows: the same weights and the same matched rates apply.

Taken as a whole, the pack is priced at SEK 13.79 per kilogram of packaging, so a heavier pack costs more in proportion to its weight.

Flat fee bands, registration fees and minimum charges sit outside this per-kilogram table.

How the fee for aluminium cans has moved on Sweden schedules

Sweden has published 3 per-mass fee schedules that price this pack. The same Standard (12 oz) aluminium cans are priced on each below, with the same weights and the same matching rules, so only the published rates differ.

The same matched categories on each Sweden schedule, per kilogram; a dash means the schedule does not publish that category.

The fee schedule behind these figures for Sweden

The rates come from the 2027 schedule of Näringslivets Producentansvar i Sverige AB (NPA) förpackningsavgifter for Sweden, effective January 1, 2027. The facts below record where it was published and what else the schedule charges.

The schedule also lists one other fee, which is not part of the per-kilogram estimate on this page.

The schedule describes an eco-modulation of its rates, so the fee a producer pays can be adjusted up or down from the base rates shown here.

Ways to lower the fee on an aluminium can

Can weight has been reduced steadily by manufacturers, so the weight of your own supplier’s can is a better input than any average.

Aluminium is often priced per kilogram below plastics, because it is recycled at a high rate, but rates differ widely between programmes.

A deposit-return scheme for cans can remove them from the producer fee schedule, so check whether one applies to your drink.

Drinks sellers who fill cans at a contract packer should ask the packer which party reports the can, because that decides who is the producer for it.